Intermitentes LED HIGHSIDER Apollo 204-170

HIGHSIDER APOLLO LED flasher module LED flasher module suitable for flush or surface mounting, black aluminium ring with tinted glass, E-tested. This innovative lighting technology uses 2 very bright SMD LEDs in the center, which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. This module is supplied with a black anodised aluminium ring that fits over the base body. In the right direction with HIGHSIDER's innovative blinker series. Show not only where you're going, but who you are. This is trend-setting design at its finest. Dimensions: A1: 13 mm A2: 9 mm D1: 22 mm D2: 20 mm Threaded bolt: M8, length: 12 mm Connections: Black cable = Mass (-) Yellow cable = Indicator (+) Scope of supply: 1 Pair Note: The unit can be installed flat without an aluminium ring, so that only the lens is visible. Alternatively, the unit with the aluminium ring can be mounted on e.g. a mounting plate on the vehicle, see instructions Art. No. 204-170A. Optionally available: Fitting taillight/indicator unit Fitting turn signal/position light unit