Intermitentes LED HIGHSIDER Rocket 204-340

HIGHSIDER ROCKET LED turn signal - suitable for installation or mounting - with black aluminium ring and tinted glass. E-approved for front and rear.

This innovative lighting technology features 6 very bright SMD LEDs in the centre which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. This combination comes with a black anodised aluminium ring that fits over the body.

In the right direction with HIGHSIDER's innovative turn signal series. Show not only where you're going, but who you are.
This is trend-setting design at its best.

Dimensions
A1: 18 mm
A2: 15 mm
D1: 45 mm
D2: 43 mm
Fastening bolt: M8 x 1.25 mm, length: 18 mm

Connections:
Black cable = Ground (-)
Yellow cable = Flasher (+)

Scope of supply: 1 pair

Other accessories from the CLASSIC series, see tab - WE RECOMMEND ALSO - or - ACCESSORIES -.

Note:
The combination can be installed flat without an aluminium ring, so that only the lens is visible. A 40 mm hole must be drilled for this purpose.
Alternatively, the combination with the aluminium ring can be mounted on e.g. a mounting plate on the vehicle.