HIGHSIDER LED sequence indicator STS 1, black housing, tinted glass. 203-221

HIGHSIDER LED Sequence flasher STS 1, E-approved
For front / rear suitable.

Shapely flasher housing made of aluminium. Dark glass, clear edges alternating with slight curves give theIndicators a modern design. With the STS 1 LED turn signal, which fits perfectly to almost every machine, thanks to the modern running light system, you can now use a modern flashing light and add a newspecial design element.

The LED technology with its many individual light sources makes it possible:
If the individual LEDs light up one after the other when flashing, aoptical wiping effect, a kind of light band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycleavailable.

Dimensions:
- Width: 68 mm
- Width with stem: 82 mm
- Height: 20 mm
- Depth: 23 mm
- Threaded bolt: M8 x 20 mm

Connections:
Yellow cable = indicator (+)
Black cable= Mass (-)

Supply: 1pair

Note:
LED indicators work with less watts than standard indicators. Therefore it may be necessary to replace the original relay with a load independentrelay must be replaced.