Contrapesos HIGHSIDER Tetra 161-314

HIGHSIDER TETRA Bar End Weights, bead blasted black satin finish With these striking Bar End Weights with handlebar end mirror mount, you can design your bike in detail according to your ideas. These end pieces are used for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outer clamp. Handlebar ends also serve to reduce annoying vibrations on the handlebars. Thanks to clamping system with different sleeves universal suitable for 7/8 (Ø22 mm), 1 inch (Ø25,4 mm) or X-Bar (Ø28,6 mm) tube handlebars with an inner diameter from 12 to 22 mm. Our accessory TIP: Excellent in combination with the striking HIGHSIDER VICTORY-BLAST handlebar end mirrors from our own company. If you do want to switch back to handlebar mirrors, you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus set colour accents. The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring. Dimensions Bar End Weights: Diameter: 34.4 mm Width: 20 mm Take up for handlebar end mirrors with external clamping: Diameter: 29.90 mm Width: 12 mm Scope of supply: 1 pair incl. Each 2 clamping sleeves with Ø 12 and 16 mm Each 2 spacer sleeves with Ø 14, 18 and 21 mm 2 x M6 central screws 2 x M6 cone nuts NOTE: For Bar End Weight with clamping system, the ends of the handlebars must not be blocked by threaded inserts or similar. Steering ends do not have to be approved, therefore do not require any test marks, certificates or ABEs.