Castrol Filter Oil does not attack paints, plastics, metals, and rubber.
Due to the very low initial viscosity and good penetration ability, the filter oil penetrates very easily into the foam - filter and wets the filter material evenly and completely.
The easily evaporating solvent contained in the filter oil evaporates very quickly, so that the high final viscosity of the oil is reached after a short time.
The filter does not lose oil either during storage or after installation in the air filter housing, even at elevated temperatures.
Castrol Filter - Oil forms a thin sticky film on the effective filter surfaces, which reliably absorbs the particles contained in the intake air without hindering the air flow.
After saturation with dirt particles, the filter can be conveniently washed with Castrol Filter Cleaner, this allows a long service life of the fabric filter.
Then squeeze the filter several times and wring out any excess product.
The filter should then be allowed to air dry for about 15 minutes to allow the solvent to evaporate and the absorbed filter oil to reach final viscosity.
Apply Castrol Filter Oil evenly to the surface of the new or cleaned filter and allow to penetrate briefly.
Marca : CASTROL
Referencia del fabricante : 2207655-15513D
Aplicación : Espuma
Base de aceite : Convencional (mineral)
Envase : A la venta por botella
Nombre de producto : Aceite
Tamaño recipiente de aceite : 400 ml (13 fl oz. estadounidenses)
Tipo : Aceite para filtro
Tipo dosificación del aceite : Spray aerosol
Unidades : Unidad
-/- Nota media
-/- Positivos
-/- Negativos
Danos tu opinión:
Por favor, intente que su opinión sobre el producto sea lo más completa posible y proporcione información útil para los demás usuarios.
Opiniones de clientes que han comprado
Aun no hay comentarios. Sé el primero en escribir uno
Al hacer clic en "Aceptar", apruebas que las cookies se guarden en tu dispositivo para el correcto funcionamiento de la web, hacer analíticas de uso y colaborar con estudios de marketing. Más información